The range of products, which can be packed using Lorapack’s patented packaging machines, is potentially endless: meat; fruit and vegetables; bakery and pastry products; technic, textile and hardware’s products; hobby and DIY products; picture frames; wooden outline; house accessories (handless, curtain sticks).
It is possible to pack loose products, as well as in tub (like cheese, wild berries, tomatoes); and also restaurant’s cover (a little bag with within cutlery and napkin). The maximum product dimensions depend on the length of the bobbin that is been used.
It is not advised to use Lorapack’s machine to pack: fragile materials (such as glass or ceramic); products with a lot of liquid (juices, sauces or mozzarellas with liquid); very thin powder (for example, flour, talcum and baking powder).
You can use all kind of welding films, such as polyethene, polypropylene, polyester, coupled film, and also biodegradable and compostable materials.
The greatest difference is speed, which is a lot higher in CRIMA FAST. Thanks to the loading belt, included in this model’s standard equipment, and translating welding and cutting jaws, CRIMA FAST can increase the packaging speed, with a maximum of 50 packs per minute.
At a later time, you can move the loading belt and CRIMA FAST can work with the same inclination plane of a normal CRIMA.
All the machines, except EASY CRIMA, can modify the atmosphere within the pack with alcohol or gas.
Due to the reduced dimensions and low speed of EASY CRIMA, the addition of the packaging with the modified atmosphere would make work much slower. For this reason is not advised.
No, it doesn’t. Lorapack’s machines require very little technical assistance because they are easy to use. If needed, it can be enough technical assistance via phone.
Naturally, to avoid machine problems, it is necessary to clean the machinery at the end of the production cycle.
Of course! If the place, where the Lorapack’s machine is going to be used, is humid or is going to be used a washing reed system, it is possible to have the packaging machinery made with stainless steel.
The first times, when you are not already accomplished with the machine, it can take 5 or 6 minutes to change the film bobbin. After, when you have learned how to do it, it takes 1 and a half minute.
The machines use a flat film bobbin; neither single-pleat film nor tubular film.